Bacteriological Incubator

Construction : Incubators are sturdy, with double-walled construction with a complete inner chamber made of Anodized Aluminum or Highly Polished Stainless Steel. The outer chamber is made of a Mild Steel Sheet, finished with powder-coated paint.

75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to a convenient height. Supplied with 2 or 3 removable shelves. Shelves are made of fully Anodized Aluminum Sheets or Polished Stainless-Steel Sheet as per chamber. A door is insulated & fitted with heavy hinges. The door has a double glass window which facilitates inspection of samples without opening the door. Heating elements, made of high-grade imported chrome wire, are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.

Temperature Control : Temperature is controlled by an imported capillary-type thermostat from ambient to 800 C. A temperature control knob is graduated in centigrade degrees after observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber.

Construction

Incubators are sturdy, with double-walled construction with a complete inner chamber made of Anodized Aluminum or Highly Polished Stainless Steel. The outer chamber is made of a Mild Steel Sheet, finished with powder-coated paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses.

Inner chamber fabricated with ribs for adjusting shelves to a convenient height. Supplied with 2 or 3 removable shelves. SHELVES are made of fully Anodized Aluminum Sheets or Polished Stainless-Steel Sheet as per chamber. The door is insulated & fitted with heavy hinges. The door has a double-glass window which facilitates inspection of samples without opening the door. Heating elements made of high-grade imported nichrome wire are put

Ventilation

Air ventilators are provided on both sides at the top to flue away any gas or fumes.

Control Panel

The equipment is provided with a panel having a thermostat control knob, an ON/OFF switch, and two pilot lamps.

Power Requirement : Supplied with cord and plug suitable to operate on 220 V single phase, 50 Hz AC supply.

Optional Accessories

• Timer.
• Air Circulating Fan.
• Digital Indicator in lieu of L-shaped thermometer.
• Digital Indicator – cum – Controller Electronic in lieu of L-shaped thermometer & thermostat.
• Microprocessor-based PID Temp. controller-cum-indicator in lieu of Thermostat & L-shaped thermometer